20 Best Cordless Framing Nailer
Updated on: September 2023
Best Cordless Framing Nailer in 2023
Paslode, Cordless XP Framing Nailer, 905600, Battery and Fuel Cell Powered, No Compressor Needed

- Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
- All Season Formula - Works in temperatures down to 14°F.
- Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces.
- Guaranteed Durability 50% Longer Run-time with 7V Li-ion Battery for up to 9,000 nails per charge.
- Compact Design: Fits between 16" o.c. studs, joists and roof trusses.
Metabo HPT Cordless Framing Nailer Kit, 18V, Brushless Motor, 2" Up To 3-1/2" Framing Nails, Compact 3.0 Ah Lithium Ion Battery, Lifetime Tool Warranty (NR1890DR)

- Same tools. New name. Hitachi power tools has renamed to Metabo HPT
- Cordless Framing Nailer
- Included: NR1890DR, Compact 3. 0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses
- Drives plastic strip nails from 2" to 3 1/2" at 2 nails per second and up to 400 nails per charge
- Zero Ramp up time: air spring system increased driving speed and provides recoil like a pneumatic nailer
- Unique air spring drive system: compressed air drives each nail
- Selective actuation: transitions between sequential mode and bump Fire mode
- Brushless motor: Metabo HPT Brushless motor provides for longer run time per charge, less maintenance and increased durability
- Also compatible with the Multivolt 8. 0Ah battery which can shoot up to 1100 nails
DEWALT DCN692B 20V Max Cordless 30° Paper Collated Framing Nailer

- Brushless motor and engine design provides the power to drive 3 1/2" nails
- Sequential or bump operating modes
- Dual speed optimizes the motor for different nail lengths
- 33 magazine holds up to 55 paper collated nails
- Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18
- Model number DCN692 and DCN692B are same
Freeman P4FRFNCB Pneumatic Framing & Finishing Combo Kit with Canvas Bag (4Piece) Nail Gun Set with Framing Nailer, Finish Nailer, Brad Nailer, & Narrow Crown Stapler

- Powerful Combo: This kit features 4 of Freeman's most useful pneumatic nailers to cover all your framing and finishing needs: a framing nailer, a finish nailer, a straight brad nailer, and a narrow crown stapler. The kit includes a rugged canvas carrying bag.
- Heavy Duty and Fine Detail: The nailers included in this combo kit are ideal for everything from heavy duty work like subfloors, roof decking, fencing, and pallet building to fine detail work like cabinetry, crown moulding, window casings, base boards, and trim.
- The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
- Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
- Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.
Paslode 905600 Cordless XP Framing Nailer (Renewed)

- 15% added power: Drives nails flush, even in lvl and the old harder woods remodelers encounter
- Keeps working in temperatures down to 14 f when used with new Paslode framing fuel/all season formula
- 7.4 v li-ion battery -up to 9, 000 nails per charge, 1-1/2 hour full charge, 2-minute quick charge for up to 200 shots
- Fewer jams and misfires when used with Paslode framing nails that have the precise nail strip collation matched to the nailer
DEWALT, DCN680D1, 20V MAX 18GA Brad NAILERKIT

- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Compatible with all DEWALT 20V MAX* batteries
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Tool-free selectable trigger for sequential or contact actuation modes
- Low nail lockout prevents dry firing and unwanted marks on the work material
Metabo HPT NR1890DC 18V Cordless Framing Nailer, Brushless Motor, 2" up to 3-1/2" Clipped & Offset Round Paper Strip Nails, 30 Degree Magazine, 3.0 Ah Lithium Ion Battery, Lifetime Tool Warranty

- New name, same great tools: for 70 years, Hitachi power tools has engineered professional grade power tools. In 2018, we renamed to Metabo HPT
- Unique air spring drive system that uses compressed air to drive each nail resulting in zero Ramp up time, increased driving speed, recoil that feels like a pneumatic nailer and quicker response time between drives
- Brushless motor for longer run time per charge, less maintenance and increased durability
- 30° magazine holds approximately 47 paper strip collated fasteners From 2" Up to 3-1/2" In length
- Drives up to 400 nails per charge using the compact 3.0Ah battery
Milwaukee Elec Tool 2742-21CT M18 Fuel Lithiumion Brushless Cordless 16Gauge Angled F Inish Nailer Kit 247221Ct
BOSTITCH 20V MAX Cordless Framing Nailer Kit, 28 Degree Wire Weld (BCF28WWM1)

- NO COMPRESSOR NEEDED: Save time and money by going cordless
- OPTIMIZATION AND POWER: Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3-1/2" fasteners
- NAIL SIZE:Accepts full round offset nails in 28-degree wire weld collation
- STALL RELEASE LEVER: Stall release lever to reset driver blade in case of jam
- WARRANTY: 3 year limited warranty
DEWALT DCN21PLB 20V MAX 21° Plastic Collated Cordless Framing Nailer (Tool Only)

- Dual-speed motor optimzed to drive a wide range of fasteners for versatility
- Tool-free selector switch for sequential or bump-fire modes
- Tool-free depth adjustment for precise nail placement
- High-strength aluminum magazine with easy-to-operate pusher latch
- Stall release lever to reset driver blade in the event of a jam
NuMax SFR2190 Pneumatic 21 Degree 3-1/2" Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and No Mar Tip

- Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
- Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
- The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
- Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
- Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.
Milwaukee Pneumatic 3-1/2 in. 21 Degree Full Round Head Framing Nailer

- Loads 20-22° full round head plastic collated nails 2” to 3-1/2” in length diameters .113” to .148”.
- All Magnesium Housing
- Adjustable Air Deflector
- Self-Cleaning Air Filter
- Removable Shingle Guide
BOSTITCH 20V MAX Framing Nailer Kit, 30 Degree Paper Tape, Cordless (BCF30P1)

- NO COMPRESSOR NEEDED: Save time and money by going cordless
- OPTIMIZATION AND POWER: Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3 1/2 inch fasteners
- NAIL SIZE: Accepts clipped and full round head nails in 30 degree paper tape collation
- STALL RELEASE LEVER: Stall release lever to reset driver blade in case of jam
- WARRANTY: 3 year limited warranty
BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch (F21PL)

- Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
- 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications
- Lightweight magnesium housing; integrated rubber skid pads; rubber grip
- Includes 1 framing nailer; Power Source: Pneumatic
- 14 1/4 by 20 1/2 inches; 8.1 pounds.Operating Pressure:80 120 psi
- 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger
- 2 nailers in one: includes two quick change nosepieces, converts to framing or metal connector applications
- Lightweight magnesium housing; integrated rubber skid pads; rubber grip
- Includes 1 framing nailer
- 14 1/4 by 20 1/2 inches; 8.1 pounds; 7 year limited warranty
DEWALT DCN21PLM1 20V MAX 21° Plastic Collated Cordless Framing Nailer Kit

- Dual-speed motor optimized to drive a wide range of fasteners for versatility
- Tool-free selector switch for sequential or bump-fire modes
- Tool-free depth adjustment for precise nail placement
- High-strength aluminum magazine with easy-to-operate pusher latch
- Stall release lever to reset driver blade in the event of a jam
BOSTITCH Air Compressor Combo Kit, 3-Tool (BTFP3KIT)

- CORDLESS AIR COMPRESSOR: The BTFP02012 is at 6 gallons, 150PSI, and 2.6SCFM with a high efficiency motor
- BRAD NAILER: The SB 1850BN drives 18 gauge Brad Nails from 5/8 inches to 2 inches for a wide variety of applications
- STRAIGHT FINISH NAILER: The SB 1664FN drives 1 1/4 to 2 1/2 inch, 16 gauge finish nails
- HEAVY DUTY CROWN STAPLER: The BTFP71875 drives heavy duty 3/8 inches Crown staples from 1/4 inches to 9/16"
- AIR HOSE: 15 foot, 1/4 inches x 25' PVC air hose with fittings air hose, and fittings offer plenty of length for maneuverability
- FASTENERS: Sample fasteners allow for instant use of all tools; Pump Type: Oil Free
- WARRANTY: This kit is covered by a 1 year limited warranty for peace of mind
CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)

- Part of the V20 cordless system
- CRAFTSMAN V20 20V max* cordless nailer drives adhesive collated 18gauge Brad nails
- Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
- Provides consistent firing power in various climate conditions and materials
- Tool-free depth settings for quick set up and consistent results
- Toolfree jam and stall settings for ease of use and improved efficiency
- Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
- Contoured overmolded handle for added comfort during use
- Belt hook provides convenient access and storage
- V20 20V MAX* Battery with high performance cells can fire up to 420 2in. nails in pine on a single charge
MILWAUKEE ELEC TOOL 2743-20 Milwaukee 15Ga Bare Nailer

- Powerstate Brushless motor provides more power, more run time, and longer life
- The product is manufactured in China
- Fully capable of sinking 2-1/2 in
Metabo HPT Framing Nailer, The Pro Preferred Brand of Pneumatic Nailers, 21° Magazine, Accepts 2" to 3-1/2" Framing Nails, (NR90AES1)

- Same tools. New name. Hitachi power tools has renamed to Metabo HPT
- The preferred Pro brand of Pneumatic nailers. *Based on the 2014, 2015, 2016, 2017, 2018 & 2019 product Brand surveys in builder & developer MAGAZINE
- Fasteners: accepts 2" Up to 3-1/2" Plastic collated framing Nails
- Lightweight: at only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
- Applications: Great for flooring and framing, truss build-up, window build-up, SUB flooring, roof decking, wall sheathing and housing construction.
- Quick transition between sequential and contact nailing
- Tool-less depth adjustment dial
Makita AN924 21º Full Round Head 3-1/2" Framing Nailer

- Faster nail driving speed for maximum performance
- Large capacity air chamber for increased power to drive nails up to 3-1/2" X . 148 in diameter
- Drives 21º plastic collated framing Nails from 2" To 3 1/2" In length and . 113 to . 148 in diameter
- Lightweight design at only 8. 3 lbs.
- Solid top-loading aluminum MAGAZINE for longer life
Tips for Choosing a Framing Nail Gun
Buying a framing nail gun? Use this guide to framing nailers before you make your purchase and get the best framing nailer for your money.
Whether you're working on a woodworking project or you're fastening shingles to your roof, nothing beats the power of a nail gun. But not all nailers are the same. In fact, there is such a wide variety of nailing equipment that for the uninitiated, it's easily enough to make their head spin. No matter what type of project you're planning on working with, use the right nail gun for the job by using this guide to nailers and get the most out of your next home improvement project.
Stick and Coil Nailers
There are two basic types of nailers-stick and coil. Stick nailers use a "stick" or row of nails that are stacked in a series and held together with a strip of glue. Stick nailers have two separate types of stick setups-angled and straight. Angled nailers are more common because they can employ a much tougher nail and a thicker gauge. Coil nailers use a "coil" of nails that are held together with two wires and come in a wrapped roll. These typically come in a straight coil but can also be offset at an angle as well. When buying nails for either one of these style of guns, you need to be sure that you have the correct angle and nail gauge for your make and model of nail gun.
Pneumatic Vs. Cordless
Nailers that use compressed air to drive the nailing piston are called pneumatic nailers. Cordless nailers use a gas cartridge or a battery pack to drive the nailing piston and don't require a bulky air compressor to make them work. Compressed air nailers are often more bulky than a cordless but are far less expensive to purchase and are much cheaper to repair when they break down.
Framing Nailers
One of the most popular nail gun styles, the framing nailer is a versatile tool that's perfect for joining large pieces of wood together. While most framing nailers are used for driving larger 10d or 12d framing nails into heavy framing materials like 2x4's, they are also great for driving smaller nails like 6d or 8d into plywood.
Considerations: When you're looking for a quality framing nail gun for your project, you may want to consider purchasing a nailer that employs a dual contact trigger. Dual contact triggers allow the user to hold down the firing trigger and "bump" the safety tip to shoot a series of nails without having to release and reengage the trigger each time you want to fire a nail. This is especially useful for nailing plywood or headers that require multiple nails in small sections.