20 Best Cordless Finish Nailer
Updated on: June 2023
Best Cordless Finish Nailer in 2023
PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)
- NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
- CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
- INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
- BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
- 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.
DEWALT DCN660B 20V 16 Gauge 20° Finish Nailer
- Integrated LED lights
- Bump operating mode
- 20-degree finish nailer
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
Makita XNB02Z 18V LXT Straight Finish Nailer, 16 Gauge/2-1/2"
- Powerful motor design drives standard 16 gauge, straight finish nails from 1" to 2-1/2" in length
- Drives up to 1, 000 finish nails using a 5.0Ah 18V LXT battery (battery not included)
- Cordless for increased convenience; eliminates the need for a compressor and air hose
- Compact center height enables viewing around the nose tip when fastening in tight spots
- Anti-dry Fire mechanism engineered to help prevent driving blanks and damage to work surface.Reversible belt clip allows the tool to remain close
PORTER-CABLE 20V MAX Finish Nailer, Straight, 16GA (PCC792LA)
- 100% battery power: Eliminates need for a compressor, hose or costly gas cartridges
- Multiple Tool Free Settings: provide increased productivity and user safety
- Motor design: provides consistent firing power into various materials and climate conditions
- Multiple tool free settings: Provides increased productivity and user safety
- Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails
DEWALT DCN660D1 20V MAX XR 16 GA Angled Finish Nailer Kit
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free jam release to quickly and easily clear nail jams
- Easy to use
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)
- Part of the V20 cordless system
- CRAFTSMAN V20 20V max* cordless nailer drives adhesive collated 18gauge Brad nails
- Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
- Provides consistent firing power in various climate conditions and materials
- Tool-free depth settings for quick set up and consistent results
- Toolfree jam and stall settings for ease of use and improved efficiency
- Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
- Contoured overmolded handle for added comfort during use
- Belt hook provides convenient access and storage
- V20 20V MAX* Battery with high performance cells can fire up to 420 2in. nails in pine on a single charge
DEWALT, DCN680D1, 20V MAX 18GA Brad NAILERKIT
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Compatible with all DEWALT 20V MAX* batteries
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Tool-free selectable trigger for sequential or contact actuation modes
- Low nail lockout prevents dry firing and unwanted marks on the work material
Ryobi P325 One+ 18V Lithium Ion Battery Powered Cordless 16 Gauge Finish Nailer (Battery Not Included, Power Tool Only)
- AIR PRESSURE ADJUSTMENT: A switch on the back of the unit allows you to increase the depth of your nail driving
- LED LIGHTING at the head allows you to see the job while you’re working in dim conditions. It can be activated by a separate trigger, too, which keeps you safe from accidentally firing off nails when you don’t want to
- LOW NAIL INDICATOR: Help prevent against dry firing by knowing that you need to replace the clip before you damage your woods
- TOOL-FREE ADJUSTMENTS: Knobs can adjust your depth, and you can flip out the front end to clear nail jams
- ONE+ COMPATIBLE: This tool is part of the One+ family, which means you can use this with Ryobi’s 18V batteries, including the P100, P102, P103, P104, P105, P107, and P108
CRAFTSMAN V20 Cordless Finish Nailer Kit, 16GA (CMCN616C1)
- Part of the V20 cordless system
- CRAFTSMAN V20 20V max* cordless nailer drives adhesive collated 16gauge finish nails
- Fully cordless design eliminates the need for compressors, hoses or costly Gas cartridges
- Provides consistent firing power in various climate conditions and materials
- Tool-free depth settings for quick set up and consistent results
- Toolfree jam and stall settings for ease of use and improved efficiency
- Lightweight with optimal center of gravity provide optimal balance and comfort in hand during use
- Contoured overmolded handle for added comfort during use
- Belt hook provides convenient access and storage
- V20 20V MAX* Battery with high performance cells can fire up to 375 2in. nails in pine on a single charge
PORTER-CABLE 20V MAX Finish Nailer, Straight, 16GA, Tool Only (PCC792B)
- Multiple Tool Free Settings: provide increased productivity and user safety
- Motor design: provides consistent firing power into various materials and climate conditions
- Multiple tool free settings: Provides increased productivity and user safety
- Fastener length capacity of 1" to 2-1/2" and a magazine capacity of 100 nails
- Battery sold separately
Metabo HPT Cordless Finish Nailer Kit | Unique Air Spring Drive System | 18V - 3.0 Ah Lithium Ion Battery | Brushless Motor | 16 Gauge | Lifetime Tool Warranty (NT1865DM)
- Same tools. New name. Hitachi power tools has renamed to Metabo HPT
- 16 Gauge cordless finish nailer
- Includes: NT1865DM Cordless Finish Nailer, (1) Compact 3. 0Ah Lithium Ion Battery BSL1830C , Charger, Contractor Bag, Safety Glasses
- Applications: For molding install, cabinetry, and finish work
- Straight magazine holds 100 16-gauge fasteners from 1" up to 2-1/2" in length
- Brushless motor for longer run time, less maintenance and increased durability
- Selective actuation switch transitions between sequential mode and bump fire mode, when rapid nailing is preferred
- Tool-less depth of drive adjustment for flush drives into various materials
- Led light is handy when working in low light areas
Cordless Brad Nailer, NEU MASTER NTC0023 Rechargeable Nail Gun/Staple Gun for Upholstery, Carpentry and Woodworking Projects, Including 20V Max. 2.0Ah Li-ion Battery and Charger
- ▲CONVENIENCE -- No compressor No cord No limits! The electric brad stapler with hook is highly suitable for DIYer to complete indoor and outdoor or high-altitude work.
- ▲All in one battery -- The high-quality rechargeable battery is compatible with all NEU MASTER 20V cordless tools. Up to 1100 shots per charge.
- ▲Widely use -- The battery nailer/stapler ideal for upholstery DIY projects such as carpentry DIY, molding trim installation while not recommended for quarter round installation, drywall installation, roofing and flooring.
- ▲FLAWLESS FINISH -- Non-Marring rubber nose provides a complete finish.
- ▲ADJUSTABLE POWER -- This wireless brad nailer designed with adjustable power function for light-duty projects.
Paslode, Cordless Finish Nailer, 902400, 16 Gauge Angled, Battery and Fuel Cell Powered, No Compressor Needed
- Precise Nail Placement - Angled magazine reaches tight spots and allows precise nail placement, crown molding or baseboard in the corners.
- No Downtime - 7V Li-ion battery and up to 12,000 nails per charge lessens downtime and provide fuel that will last a full day.
- Lightweight - Only 4.5 lbs. for added comfort and control.
- Convenient Maneuvering - Cordless design and no hoses make work easier.
- No Mar Tip - Preserves smooth surface and prevents scratching and markings on work surfaces.
Dewalt DCN680D1R 20V MAX Cordless Lithium-Ion XR 18 GA Cordless Brad Nailer Kit (Renewed)
- Battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement
- Tool-free jam release to quickly and easily clear nail jams
BOSTITCH 20V MAX Finish Nailer Kit, Straight, 16GA (BCN662D1)
- NO COMPRESSOR NEEDED: Save time and money by going cordless
- MORE POWER: Brushless motor and engine design drives 16ga straight finish nails from 1 1/4 inch to 2 1/2 inch length
- INCREASED ACCURACY: Features a narrow nose designed for clear line of sight and accuracy of nail placement
- BETTER VISIBILITY: Multi functional LED lights help to provide both workspace illumination and tool diagnostics
- SAFER & MORE EFFICIENT: Tool free jam release to quickly and easily clear nail jams
- TOOL FREE SELECTOR: Tool Free Selector switch for sequential and contact actuation modes; for accurate fastener placement and faster application speed
Ryobi P320 Airstrike 18 Volt One+ Lithium Ion Cordless Brad Nailer (Battery Not Included, Power Tool Only)
- Drives up to 1700 nails per charge
- No compressors, hoses or pricey gas cartridges required. Cordless design offers both convenience and superior performance.
- Convenient adjustment dial regulates air pressure for optimum results.
- Low-nail indicator to quickly and easily see when it is time to reload
- Includes: 18-V ONE AirStrike 18-Gauge Cordless Brad Nailer, Battery sold separately
Milwaukee Elec Tool 2742-21CT M18 Fuel Lithiumion Brushless Cordless 16Gauge Angled F Inish Nailer Kit 247221Ct
Senco 5N0001N Fusion Finish Nailer
- This product is easy to use.
- This product is highly durable
- This product is manufactured in China
- Rapid charge battery reaches 80% in just 15 minutes
- Patented reflex shot design
- Robust aluminum drive cylinder
- Selective drive switch
- Nose Mounted LED Light
- Thumbwheel Depth-of-Drive
Metabo HPT Finish Nailer, 16 Gauge, Finish Nails - 1-Inch up to 2-1/2-Inch, Integrated Air Duster, 5-Year Warranty (NT65M2S)
- Same tools. New name. Hitachi power tools has renamed to Metabo HPT
- Accepts 16-gauge fasteners ranging from 1" Up to 2-1/2"
- Ergonomically designed simple flip actuation switch for easy transitions between bump Fire or sequential Fire modes
- Integrated air Duster button allows air from the compressor to bypass the nailing function and expel air from a hole in the front of the nailer
- Tool-less depth of drive dial allows the user to easily adjust the drive depth for a professional finish
- 360 Degree, fully adjustable exhaust port directs air exhaust away from the user during use
- No-mar tip protects the work surface from damage
- Elastomer grip adds comfort and provides a secure hold
Makita XNB01Z 18V LXT Lithium-Ion Cordless 2" Brad Nailer
- Drives a range of 18 gauge brad nails from 5/8" to 2"; magazine capacity up to 110 nails
- 2-mode selector switch for sequential or contact nailing operation. Net weight (with battery): 7.7 pounds
- Easy to use "tool-less" depth adjustment dial for a wide variety of finish applications
- Anti-dry drive mechanism engineered to prevent driving blanks and damage to work surface
- Battery gauge indicates battery charge level
- Drives up to 1,660 finish nails using a 5.0Ah 18V LXT Battery (battery not included)
Product Review: Hitachi NR83A2 Framing Nailer
If you're looking for a quality framing nailer, then the Hitachi NR83A2 is just what you're looking for. The nailer is equipped with a 3/8-inch air inlet and can operate at an air pressure between 70 and 120 PSI.
The Hitachi NR83A2 is equipped with a selective actuation switch. This allows you to use the nailer in either sequential or bump firing mode. The sequential firing mode is useful when you need accurate placement of the fasteners. In bump firing mode, the Hitachi NR83A2 is useful when speed is more important than accuracy.
The Hitachi NR83A2 is equipped with a two-piece black steel magazine. The top-loading magazine features a 21-degree angle. The Hitachi NR83A2 can hold between 64 and 70 fasteners at one time. The magazine is designed to accommodate fasteners with a length between 2 inches and 3 1/4 inches.
This framing nailer measures 21 x 4 x 13 inches. You will also appreciate the fact that the Hitachi NR83A2 weighs just under eight pounds. Therefore, you won't strain yourself too much when you need to use it for extended periods of time. Also, the Hitachi NR83A2 is equipped with a rubber grip to offer more comfort.
The Hitachi NR83A2 framing nailer allows you to change the depth setting without the use of tools. The unit is also available without depth adjustment. The likelihood of jams is always present when using a framing nailer. Fortunately, the Hitachi NR83A2 features an open nose design. This allows you to clear jams easily, so that you don't have much unexpected downtime. When you buy the Hitachi NR83A2 you are provided with a pair of safety glasses. A total of three hex bar wrenches are also included in the package.
If you're in the market for a framing nailer, then you should take a look at the Hitachi NR83A2. It is equipped with a selective actuation switch that allows you to operate the nailer in either sequential or bump firing modes. The top-loading magazine used for the Hitachi NR83A2 can hold between 64 and 70 fasteners at a time. Also, the unit weighs slightly less than eight pounds, so it won't cause too much strain during periods of extended use.
